Amerec
Amerec has been manufacturing quality steam bath generators for more than 30 years. They offer a wide range of steam and sauna products.
The residential product line includes the AK, AT and VaporMist products. The AK product needs the K30 or K60 control packages as a separate purchase as is the traditional steam generator product.
This AK series can use the K60 or K30 control packages. The K60 offers time and temperature settings; the K30 is a simple 30 minute timer with on/off control. The controls are both available in dual packages, so one control is inside the steam room and one out if needed.
Also available is the new K200i remote control for the AK series that allows the user to operate the steam shower within a ~50 radius, so can switch on the steam room and make changes remotely.
The newer AT line is supplied as a complete product including the T100 control and steam head, an auto drain, ADK pictured below, to keep the tank water fresh. The touch screen T100 control can be used to preset time and temperature, and pre-heat the room at a selected time if required.
Finally, the 2 kW Vapormist product is designed for very small steam rooms and uses 120 volts, instead of the traditional 220-240 volts. It is supplied with a 60-minute timer control and steam head.
Amerec has been manufacturing quality steam bath generators for more than 30 years. They offer a wide range of steam and sauna products.
The residential product line includes the AK, AT and VaporMist products. The AK product needs the K30 or K60 control packages as a separate purchase as is the traditional steam generator product.
This AK series can use the K60 or K30 control packages. The K60 offers time and temperature settings; the K30 is a simple 30 minute timer with on/off control. The controls are both available in dual packages, so one control is inside the steam room and one out if needed.
Also available is the new K200i remote control for the AK series that allows the user to operate the steam shower within a ~50 radius, so can switch on the steam room and make changes remotely.
The newer AT line is supplied as a complete product including the T100 control and steam head, an auto drain, ADK pictured below, to keep the tank water fresh. The touch screen T100 control can be used to preset time and temperature, and pre-heat the room at a selected time if required.
Finally, the 2 kW Vapormist product is designed for very small steam rooms and uses 120 volts, instead of the traditional 220-240 volts. It is supplied with a 60-minute timer control and steam head.
Amerec has been manufacturing quality steam bath generators for more than 30 years. They offer a wide range of steam and sauna products.
The residential product line includes the AK, AT and VaporMist products. The AK product needs the K30 or K60 control packages as a separate purchase as is the traditional steam generator product.
This AK series can use the K60 or K30 control packages. The K60 offers time and temperature settings; the K30 is a simple 30 minute timer with on/off control. The controls are both available in dual packages, so one control is inside the steam room and one out if needed.
Also available is the new K200i remote control for the AK series that allows the user to operate the steam shower within a ~50 radius, so can switch on the steam room and make changes remotely.
The newer AT line is supplied as a complete product including the T100 control and steam head, an auto drain, ADK pictured below, to keep the tank water fresh. The touch screen T100 control can be used to preset time and temperature, and pre-heat the room at a selected time if required.
Finally, the 2 kW Vapormist product is designed for very small steam rooms and uses 120 volts, instead of the traditional 220-240 volts. It is supplied with a 60-minute timer control and steam head.
Amerec has been manufacturing quality steam bath generators for more than 30 years. They offer a wide range of steam and sauna products.
The residential product line includes the AK, AX and VaporMist products. The AK product needs the K30 or K60 control packages as a separate purchase as is the traditional steam generator product. The advanced AX series needs the A6 or A3 control package.
This AK series can use the K60 or K30 control packages. The K60 offers time and temperature settings; the K30 is a simple 30 minute timer with on/off control. The controls are both available in dual packages, so one control is inside the steam room and one out if needed.
Also available is the new K200i remote control for the AK series that allows the user to operate the steam shower within a ~50 radius, so can switch on the steam room and make changes remotely.
Finally, the 2 kW Vapormist product is designed for very small steam rooms and uses 120 volts, instead of the traditional 220-240 volts. It is supplied with a 60-minute timer control and steam head.
Amerec has been manufacturing quality steam bath generators for more than 30 years. They offer a wide range of steam and sauna products.
The residential product line includes the AK, AX and VaporMist products. The AK product needs the K30 or K60 control packages as a separate purchase as is the traditional steam generator product. The advanced AX series needs the A6 or A3 control package.
This AK series can use the K60 or K30 control packages. The K60 offers time and temperature settings; the K30 is a simple 30 minute timer with on/off control. The controls are both available in dual packages, so one control is inside the steam room and one out if needed.
Also available is the new K200i remote control for the AK series that allows the user to operate the steam shower within a ~50 radius, so can switch on the steam room and make changes remotely.
Finally, the 2 kW Vapormist product is designed for very small steam rooms and uses 120 volts, instead of the traditional 220-240 volts. It is supplied with a 60-minute timer control and steam head.
Amerec has been manufacturing quality steam bath generators for more than 30 years. They offer a wide range of steam and sauna products.
The residential product line includes the AK, AT and VaporMist products. The AK product needs the K30 or K60 control packages as a separate purchase as is the traditional steam generator product.
This AK series can use the K60 or K30 control packages. The K60 offers time and temperature settings; the K30 is a simple 30 minute timer with on/off control. The controls are both available in dual packages, so one control is inside the steam room and one out if needed.
Also available is the new K200i remote control for the AK series that allows the user to operate the steam shower within a ~50 radius, so can switch on the steam room and make changes remotely.
The newer AT line is supplied as a complete product including the T100 control and steam head, an auto drain, ADK pictured below, to keep the tank water fresh. The touch screen T100 control can be used to preset time and temperature, and pre-heat the room at a selected time if required.
Finally, the 2 kW Vapormist product is designed for very small steam rooms and uses 120 volts, instead of the traditional 220-240 volts. It is supplied with a 60-minute timer control and steam head.
Amerec has been manufacturing quality steam bath generators for more than 30 years. They offer a wide range of steam and sauna products.
The residential product line includes the AK, AX and VaporMist products. The AK product needs the K30 or K60 control packages as a separate purchase as is the traditional steam generator product. The advanced AX series needs the A6 or A3 control package.
This AK series can use the K60 or K30 control packages. The K60 offers time and temperature settings; the K30 is a simple 30 minute timer with on/off control. The controls are both available in dual packages, so one control is inside the steam room and one out if needed.
Also available is the new K200i remote control for the AK series that allows the user to operate the steam shower within a ~50 radius, so can switch on the steam room and make changes remotely.
Finally, the 2 kW Vapormist product is designed for very small steam rooms and uses 120 volts, instead of the traditional 220-240 volts. It is supplied with a 60-minute timer control and steam head.
All Panel-Built and Custom-Cut sauna packages are manufactured of clear Western Red Cedar or Hemlock and include the following: stainless steel bucket and ladle, wall-mounted light, 5”thermometer, duckboard for walk area, headrest and backrest for each upper bench and heater guard rail. Benches are pre-assembled.
All-glass bronze tint door is standard. Hinged right or hinged left door swing must be specified. NOTE: Sauna heater and control, Amerec Designer B in-room control of your sauna. Control features ”9+1” timer with 9 hour delay feature. Controls are bottom mounted, front or side of sauna stove.
All Panel-Built and Custom-Cut sauna packages are manufactured of clear Western Red Cedar or Hemlock and include the following: stainless steel bucket and ladle, wall-mounted light, 5”thermometer, duckboard for walk area, headrest and backrest for each upper bench and heater guard rail. Benches are pre-assembled.
All-glass bronze tint door is standard. Hinged right or hinged left door swing must be specified. NOTE: Sauna heater and control, Amerec Designer B in-room control of your sauna. Control features ”9+1” timer with 9 hour delay feature. Controls are bottom mounted, front or side of sauna stove.
All Panel-Built and Custom-Cut sauna packages are manufactured of clear Western Red Cedar or Hemlock and include the following: stainless steel bucket and ladle, wall-mounted light, 5”thermometer, duckboard for walk area, headrest and backrest for each upper bench and heater guard rail. Benches are pre-assembled.
All-glass bronze tint door is standard. Hinged right or hinged left door swing must be specified. NOTE: Sauna heater and control, Amerec Designer B in-room control of your sauna. Control features ”9+1” timer with 9 hour delay feature. Controls are bottom mounted, front or side of sauna stove.
All Panel-Built and Custom-Cut sauna packages are manufactured of clear Western Red Cedar or Hemlock and include the following: stainless steel bucket and ladle, wall-mounted light, 5”thermometer, duckboard for walk area, headrest and backrest for each upper bench and heater guard rail. Benches are pre-assembled.
All-glass bronze tint door is standard. Hinged right or hinged left door swing must be specified. NOTE: Sauna heater and control, Amerec Designer B in-room control of your sauna. Control features ”9+1” timer with 9 hour delay feature. Controls are bottom mounted, front or side of sauna stove.
All Panel-Built and Custom-Cut sauna packages are manufactured of clear Western Red Cedar or Hemlock and include the following: stainless steel bucket and ladle, wall-mounted light, 5”thermometer, duckboard for walk area, headrest and backrest for each upper bench and heater guard rail. Benches are pre-assembled.
All-glass bronze tint door is standard. Hinged right or hinged left door swing must be specified. NOTE: Sauna heater and control, Amerec Designer B in-room control of your sauna. Control features ”9+1” timer with 9 hour delay feature. Controls are bottom mounted, front or side of sauna stove.
All Panel-Built and Custom-Cut sauna packages are manufactured of clear Western Red Cedar or Hemlock and include the following: stainless steel bucket and ladle, wall-mounted light, 5”thermometer, duckboard for walk area, headrest and backrest for each upper bench and heater guard rail. Benches are pre-assembled.
All-glass bronze tint door is standard. Hinged right or hinged left door swing must be specified. NOTE: Sauna heater and control, Amerec Designer B in-room control of your sauna. Control features ”9+1” timer with 9 hour delay feature. Controls are bottom mounted, front or side of sauna stove.
All Panel-Built and Custom-Cut sauna packages are manufactured of clear Western Red Cedar or Hemlock and include the following: stainless steel bucket and ladle, wall-mounted light, 5”thermometer, duckboard for walk area, headrest and backrest for each upper bench and heater guard rail. Benches are pre-assembled.
All-glass bronze tint door is standard. Hinged right or hinged left door swing must be specified. NOTE: Sauna heater and control, Amerec Designer B in-room control of your sauna. Control features ”9+1” timer with 9 hour delay feature. Controls are bottom mounted, front or side of sauna stove.
All Panel-Built and Custom-Cut sauna packages are manufactured of clear Western Red Cedar or Hemlock and include the following: stainless steel bucket and ladle, wall-mounted light, 5”thermometer, duckboard for walk area, headrest and backrest for each upper bench and heater guard rail. Benches are pre-assembled.
All-glass bronze tint door is standard. Hinged right or hinged left door swing must be specified. NOTE: Sauna heater and control, Amerec Designer B in-room control of your sauna. Control features ”9+1” timer with 9 hour delay feature. Controls are bottom mounted, front or side of sauna stove.
All custom-cut sauna packages are manufactured of clear Western Red Cedar and include the following -
rocks, stainless steel bucket and ladle, wall light, 5" thermometer, duck-board for walk area, headrest(s), heater guard, 24" x 80", pre-hung all glass bronze tint door (27-1/2" x 82-1/4" R.O.) and necessary hardware, pre-built benches assembled from the bottom with stainless steel screws, pre-cut T & G for interior walls and ceiling, corner and cove molding, interior door casing, sliding vent valve, two (2) vent grilles, foil vapor barrier, backrest for each upper bench and hardware package.
All Panel-Built and Custom-Cut sauna packages are manufactured of clear Western Red Cedar or Hemlock and include the following: stainless steel bucket and ladle, wall-mounted light, 5”thermometer, duckboard for walk area, headrest and backrest for each upper bench and heater guard rail. Benches are pre-assembled.
All-glass bronze tint door is standard. Hinged right or hinged left door swing must be specified. NOTE: Sauna heater and control, Amerec Designer B in-room control of your sauna. Control features ”9+1” timer with 9 hour delay feature. Controls are bottom mounted, front or side of sauna stove.
All Panel-Built and Custom-Cut sauna packages are manufactured of clear Western Red Cedar or Hemlock and include the following: stainless steel bucket and ladle, wall-mounted light, 5”thermometer, duckboard for walk area, headrest and backrest for each upper bench and heater guard rail. Benches are pre-assembled.
All-glass bronze tint door is standard. Hinged right or hinged left door swing must be specified. NOTE: Sauna heater and control, Amerec Designer B in-room control of your sauna. Control features ”9+1” timer with 9 hour delay feature. Controls are bottom mounted, front or side of sauna stove.
The heavy-duty cycle AI series available in a variety of voltages, and control options including single and dual room control packages, and a 30-minute timer. The center photo represents all three options.
We strongly recommend the automatic boiler flushing feature, pictured to the right, the ADI. As boilers with 24/7 duty cycles need flushing according to a schedule, this timer and control product does that without manual intervention. The “blow-down” cleaning cycle is very important for boiler longevity.
All Panel-Built and Custom-Cut sauna packages are manufactured of clear Western Red Cedar or Hemlock and include the following: stainless steel bucket and ladle, wall-mounted light, 5”thermometer, duckboard for walk area, headrest and backrest for each upper bench and heater guard rail. Benches are pre-assembled.
All-glass bronze tint door is standard. Hinged right or hinged left door swing must be specified. NOTE: Sauna heater and control, Amerec Designer B in-room control of your sauna. Control features ”9+1” timer with 9 hour delay feature. Controls are bottom mounted, front or side of sauna stove.
All Panel-Built and Custom-Cut sauna packages are manufactured of clear Western Red Cedar or Hemlock and include the following: stainless steel bucket and ladle, wall-mounted light, 5”thermometer, duckboard for walk area, headrest and backrest for each upper bench and heater guard rail. Benches are pre-assembled.
All-glass bronze tint door is standard. Hinged right or hinged left door swing must be specified. NOTE: Sauna heater and control, Amerec Designer B in-room control of your sauna. Control features ”9+1” timer with 9 hour delay feature. Controls are bottom mounted, front or side of sauna stove.
The heavy-duty cycle AI series available in a variety of voltages, and control options including single and dual room control packages, and a 30-minute timer. The center photo represents all three options.
We strongly recommend the automatic boiler flushing feature, pictured to the right, the ADI. As boilers with 24/7 duty cycles need flushing according to a schedule, this timer and control product does that without manual intervention. The “blow-down” cleaning cycle is very important for boiler longevity.
FeaturedSee Our Most featured Products
